As the first step of potato chips making process

Banana chips production manufacturing process

Banana chips, kripik pisang, Fried plantain chips, or chifles has very well established and standardized process; the final process, of course, is not the same due to the distinct tastes of different countries

Banana chips machine manufacturers, thereby, is able to provide the relevant plantain processing machine according to different processing technology requirements.

Banana and Plantain peeling process

As the first step of potato chips making process, both batch operation for small scale capacity and industry manufacture, unripe bananas or plantains are peeled by hand is still a normally way.Banana and Plantain Slicing

Banana plantain chips slicing machine is suitable for not only batch operations for small scale capacity, but also industry manufacture.

Both slicing thickness is adjustable easily.

Round shape and italic shape banana and plantain chips are all able to be sliced with slicing blade angle adjustable.

Banana and Plantain Chips Frying

For small scale banana chips or plantain chips making process, it is a batch operation from slicing and frying. The small banana chips plantain chips Single Screw Barrel Of Injection Moulding Machine Manufacturers fryer is recommended. This chips frying machine uses electricity as heating source with stirrer and automatic discharge operate. It is almost automatic instead of agitation by hand during frying.

For plantain chips industry manufacture, a continuously automatic chips frying machine will be applied.

Continuously working, full automatic control, there is no any worry.

Frying temperature can be controlled automatically

Heating thermal efficiency is more than 95%

Equipped with automatic oil filter, there is no carbonization in the oil and the oil will not turn black

Potato chips French fries has bright colors, good taste and improving product quality.

Banana Chips Flavouring

This process is option, depends on different customer request.

After deep fried process, either salt or spices or both are applied if necessary.

After cooling, they are packed.

How to Make Crispy Fries? Automatic Potato Chips Making Manufacturing Process

01 Potato visual inspection

When the potatoes arrive at the plant, the potatoes are examined for green edges and blemishes.

02 Potato conveyers

The potatoes move along a potato elevator to potato peeling machine, there are a sediment design in the feeding water sink. The sediment on potatoes is precipitated and discharged through the sewage exit while conveyers.

However, potatoes need to be manual put into this water sink.

03 Potato peeling

Both batch potato chips production line and potato chips industry manufactures, potato peeling must be the necessary step. Potato peeler machine ensures optimum peeling. The less peel is removed, the higher the yield of your process.

As the potato peeler machine manufacturers, our potato peeling machine has these features:

Using brush rolls to finish the peeling of potato and separate shower for washing while screw blade carries potatoes forward.

Small damage and more cleaning.

Big capacity is suitable for industrial application.

Sometimes, two times operation for potato peeling is recommended, this depends on the final capacity and how fresh potato is. One is normally potato peeler, and second is a potato peeling machine with steam shower. This will be easy to remove thin skin from potatoes with minimum damage and maximum cleaning

04 potato sorting

After potato peeling process, hand picking will be done on a sorting table to select the defective potatoes. And then up-to-standard potatoes will be conveyer to next process, chips or fries cutting and slicing.

05 Potato chips slicing

How to cut potatoes for French fries? How to cut waffle fries? How to make potato crisps?

In this process, Potato chips slicing machine will cut the peeled potatoes into slices, chips, sticks, strips and shredded potatoes easily. ​

Straight blades produce regular chips while rippled blades produce ridged potato chips

Thickness of potato strips & slices are adjustable (from 1.5-10mm)

06 Potato chips washing

The slices fall into a cold-water air bubble washer that removes the starch released when the potatoes are cut. Some manufacturers, who market their chips as natural, do not wash the starch off the potatoes.

07 Chips blanching

Sometimes, chips blanching process means color treatment.

An accurate blanching time and correct temperature setting is the key for this process.

Potato Chips blanching machine has water temperature automatically controlled and blanching time adjustable freely.

After blanching process, potato chips or fries will have superior flavor, texture and color while active enzyme is restrained for easy reservation.

08 potato chips cooling

Potato chips and fries will have some extra temperature after blanching process, sometimes adhesion problem of chips and fries will happens. Cooling machine which uses the up and down air bubble will completely broke up the chips and fries while the temperature will drop immediately, at the same time, excessive blanching for chips and fries will be avoid.

Potato chips cooling machine is the same to the chips washer.

09 Potato chips air dehydration

Before the chips or fries are fried, it should be properly dried. This will raise the quality of the end result of the frying process, which results in a crispier.

Potato chips air drying machine conveyer chips or fries with air blowing while chips turnover, the surface water will be removed completely and quickly, it is helpful for the frying process, not only saving frying time, but also having a crispier production.

10 Chips fries frying

How to make potato crisps? How to make fries?

In this process, fresh potato chips and fries will be fried with a continuously chips fries fryer.

Continuously working, full automatic control, there is no any worry.

Frying temperature can be controlled automatically

Heating source is electricity; thermal efficiency is more than 95%

Equipped with automatic oil filter, there is no carbonization in the oil and the oil will not turn black

Potato chips French fries has bright color, good taste and improving product quality.

Frying time in accordance with different recipe is easy to set up and automatic control during chips and fries frying process.

11. Fried Potato Chips De-oiling and Sorting

Potato chips and French fires are crisper and tasty after de-oiling process, also too much fat has no benefits to health.

Chips De-oiling machine is similar to Potato chips air dehydration machine, a wire mesh belt pulls out the hot chips. As the chips move along the mesh conveyer belt, excess oil is drained off with a jet air blowing process and the chips begin to cool. They then move under an optical sorter that picks out any burnt slices and removes.

12. Potato Chips Fries Flavouring

Potato chips that are to be flavoured pass through a drum potato chips fries flavoring machine which is filled with the desired powdered seasonings.to meet different customer demand for potato chips, hot chips, finger chips, fries, frites, potato wedges.

13. Potato Chips Packaging

The chips are conveyed to a chips automatic packaging machine with a scale. As the pre-set weight of chips is measured, a metal detector checks the chips once more for any foreign matter such as metal pieces that could have come with the potatoes or been picked up in the frying process.

Water is the main culprit in a major portion of foundation problems

Water is the main culprit in a major portion of foundation problems. Whether the foundation is of poured concrete, block concrete or stone, continuous water seepage creates cracks which can often be disastrous if ignored.

Cracks due to water seepage are found in the corners of the walls, or where the bricks, stone or concrete slabs join together. If the ground water has enough hydrostatic pressure to allow the water to seep through the foundation, then cracks occur. These cracks begin as small hairline cracks and widen as time passes.

There are two basic methods to repairing foundation leaks at home or in the basement - the urethane injection and the drainage tile repair.

The urethane injection is a comparatively simple process. In this process, the crack is sealed first to prevent any water from oozing out. Holes are then made in the crack and an epoxy resin is injected into the crack. The repair is complete when resin fills the entire crack. Urethane injections cost only a few hundreds of dollars and the time taken for the entire work to the completed won't stretch beyond a couple of hours. However, the urethane injections can only be applied to small cracks. Also there is the danger of the crack reopening and water seeping in once again.

The drainage tile repair is a lengthy process. First the floor tiles China Wholesale Parallel Twin Screw Barrel Suppliers of the affected area are uprooted and a drain tile is fitted. This is then connected to a sump pump or any other legally allowed water removal system. Once this is done, the floor tiles are replaced. This process takes a few days and costs run to thousands of dollars. However, this is a much more permanent method than the injection. One problem may be the malfunctioning of the sump pump. This may cause flooding due to excessive leakage.

Urethane injections are okay if the crack is small, but if the crack has been ignored and has become large and gaping, it is better to repair it using a drainage tile. For larger leaks outside the house, a more extensive method is employed. A trench is dug at the affected place and the drainage tile is replaced if necessary. The trench is then filled ? first with coarse gravel to make it more waterproof and then with the soil. This method is used even when dams spring a leak in their foundation.

Repairing foundation leaks is a costly business, but more than that it is a time-consuming and laborious process. However, it is one of those repair works which just cannot be ignored.

The origins and principle of the Mesotherapy is a medical treatment

What is Mesotherapy?

Mesotherapy is a fat and cellulite treatment that is practice by over 20,000 doctors in France. The Mesotherapy treatment consists in injecting a micro amount of medicamentous substances right under the skin, in the direct vicinity of the problem to be treated. Mesotherapy is used for a variety of things including, weight loss, Cellulite removal, face and neck rejuvenation, and hair loss.

The origins and principle of the Mesotherapy is a medical treatment consisting in managing drugs by microinjections in the skin. This technique was developed in 1952 by Doctor Michel Pistor a French doctor. The overall philosophy of Mesotherapy treatment translated from French is: "To inject little, seldom, at the good place". In other words, a drug must traverse the smallest possible way. This philosophy is key to insuring that the solution is injected to benefit the problem which one wants to deal with, versus treating the entire body.

By using the localized Mesotherapy treatment philosophy a Mesotherapy doctor avoids the problem of substances passing in blood and from going in the stomach or the liver. With other type treatments the body can be faced with unintended Single Screw Barrel Of Injection Moulding Machine Manufacturers damage that is often caused by the sometimes aggressive drugs.

What occurs at the first consultation?

To insure the body is maintained with proper care during the treatment period the first consultation is very significant, and should revolved around collecting much in the way of personal background and health information. This is necessary because it helps the doctor decide when and if to begin the treatment.

Do Mesotherapy injections hurt?

The Mesotherapy injection is almost painless and is practiced without anesthesia. For individuals with more sensitive skin it is possible to apply an anesthetic cream 1/2 hour before the treatment.

What is the cost of Mesotherapy?

Mesotherapy treatments range from $300-$550 per area per treatment. An initial consultation and examination is needed. The costs for these initial consultations typically run $250 to $275. As with any treatment, Mesotherapy in Houston will cost less than Mesotherapy in Los Angeles.

Are there Mesotherapy side effects that I should be concerned with?

Barring allergy to a Mesotherapy ingredient, the side effects are usually limited to bruising. The bruises as a rule fade within one week. It is recommended that allergies and other sensitivities should be discussed during the first consultation.

How long does the treatment take?

The procedure generally takes 30 minutes and requires no preparation or recovery time.

Can I go back to work after the treatment?

The patient is able to return to work immediately after treatment.

How long do the benefits last?

Doctors practicing Mesotherapy treatment claim that the areas undergoing Mesotherapy treatment areas will remain free of undesired fat as long as the patient continues to practice healthy dietary habits and ongoing exercise. Mesotherapy treatments for cellulite will require maintenance on a six month to one year basis.

Will my insurance cover Mesotherapy treatment?

Because a Mesotherapy injection is considered an elective procedure, insurance usually will not cover the procedure.

Pacific Plastics believes that the most time is lost during the initial engineering phases

Pacific Plastics believes that the most time is lost during the initial engineering phases through pilot manufacturing. Typically this happens because a device or components being prototyped are done so in a manner "quick and dirty"-- that is, not conducive to a production manufacturing process which can be validated in an IQOQPQPPQ. The methods used in prototyping may then require re-spinning the design, more verification testing, and potentially further prototyping -- any or all of which can derail your ability to meet your production needs on time.

There are many options to choose from for clean room medical device manufacturing companies in the market today, and there are certain criteria for success that we at Pacific Plastics will encourage you to evaluate as you target strong manufacturing success. Picking a contract manufacturer with at least one custom manufacturing core competency in-house is a good start.We are up to meet this challenge. Not long ago we had a client with an intriguing problem:THE CHALLENGE - A prospective medical customer came to us with parts produced by another molder that did not meet tolerance and were continually rejected for processing and quality deficiencies. 

Since this product was part of the "life blood" of the company and instrumental to Single Screw Barrel Of Injection Moulding Machine their product launch, they needed a competent medical molder who understood these unusual challenges. Referred by another satisfied medical customer, we met to understand their issues of high volume production and resin requirements. Pacific Plastics & Engineering was then instructed to build a new high-volume mold that met the customer's stringent quality requirements.THE INVESTIGATION - After studying the part design and engineering requirements, we researched the resin characteristics. First, we learned that the resin contains fillers that produce anisotropic shrinkage characteristics. The shrinkage in the resin flow and transverse flow directions were appreciably different. Second, the resin was extremely hygroscopic.

 It could either absorb water from or lose water to the surrounding environment. With a short time exposure in a humid environment, the part could grow twice its allowable tolerance. Finally, the resin contained an oily additive that could contaminate the part surface and leave residue everywhere inside the tool.THE SOLUTION - With both processing and tooling concerns well assessed, the first step was to design and fabricate a multi-cavity Class 101 tool that could survive cycling 24 hours a day. This requirement meant that proper steel selections and a robust design would have to be generated. However, before this could start, we needed to assess the differential shrink rates. 

A quick prototype tool was built using the exact part geometry of a portion of the part. A stable process was established to achieve and hold the dimensions required. After completing the design and building the high-volume tool, the final process could be initiated. To process the part, we implemented several steps: (1) installation of proprietary equipment on the molding machine to remove both moisture and oil; (2) implementing a capable process that includes allowance for moisture absorption to accommodate customer's automation equipment; and (3) adopting stringent quality control procedures over our in-process inspections. With no customer rejects, the tool has run flawlessly since its debut many months ago.

To hand craft wooden top water fishing plugs requires minimal equipment

As the surface of the water explodes, adrenaline shoots through your body. Your muscles lock you into position for a fight against whatever has just smashed your top water plug. No doubt about it, you're in for a scrap. You sweat, ache, curse and pray you'll get the fish into the boat. Your heart pounds as you wonder, "Will my knots hold? Did I set the hooks deep enough? Will everything hold together long enough for me to get this fish in?" The eventual catch is made all the sweeter by one outstanding fact ? YOU hand crafted this plug yourself. It was you who dreamed it, whittled it, sanded it, painted it, and fabricated its every facet. Now you have your dividends in spades. There's a fish on. But first, let's hand craft a minnow-imitation, Rapala type lure.

Hand Crafting a Lure

To hand craft wooden top water fishing plugs requires minimal equipment. Here's what you basically need:

? 5" long Wooden plug blanks, sawed off from an old broom or mop handle You can also use wooden dowel stock

? A whittling knife or a box-cutter with break-off blades

? Small cans of white, red, yellow and blue enamel paint to color the lure

? Two Plastic doll eyes for each lure (the kind where the black eye part moves around)

? 3 or 4 Long-threaded screw eyes in brass or stainless to attach hooks and leaders

? A small spool of red or white sewing thread for wrapping on buck tails

? 3 or 4 number 5, 6 or 7 stainless steel split rings to attach hooks and leaders

? Barrel swivels to help prevent line twist above the leader

? A few 3" to 4" square pieces of medium to fine sandpaper to finish the lure surface

? 4" lengths of nylon ribbon or nylon rope to make the buck tail

? A tube of Super glue to cement in the screw eyes into the plug body

? Rubber cement to seal the thread wrapping of the buck tail

? A little love, patience and a sense of pride to add to the China Barrels and Screw Factory patina of your work

Lure Assembly Procedure

The procedure is simply to whittle down the wooden plug into a minnow-like shape, then sand the plug body to a smooth finish. Screw in the screw eyes, back them out, fill the holes with super glue then immediately screw them back in. You'll need one screw eye in the head, one in the belly and a tail screw eye. Paint the lure with a color pattern of your choice. The lure assembly should thoroughly dry for at least a day in good sun. You want solvent odors and residue gone completely.

Make big, bug-eyed lures

Attach lure eyes with super glue. Use the largest doll eyes that you can for the lure size. Yes, the bigger, the better. They drive the fish nuts, so you want a big-eyed lure. Attach hooks to belly and tail screw eyes using split rings. Wrap a buck tail on to the tail hook shank using the sewing thread. I like red thread with a white buck tail. Coat the thread with rubber cement to seal it. Use a fine comb to "comb out" the buck tail so it's nice and fluffy. It should be just a bit longer than the hook. I use a moustache comb and small scissors to trim it up just so.

Attaching Terminal Tackle

Clip or tie on your leader or leader material. For strictly salt water use, I always use stainless steel wire leaders which are wrapped or double-looped and hand-tied on. The lure assembly should thoroughly dry for at least a day in good sun. You want solvent odors and residue gone before its baptism in seawater.

The final step is to test your lure by trolling it a moderate speed about thirty yards behind your boat. Just be ready for an explosive strike. Then, as the surface of the water explodes ?